Fargo Distribution and Use of Theft-Detection Shielding Devices Defense
North Dakota does not treat every bag, magnet, cutting tool, or retail-security incident as the same crime. N.D.C.C. § 12.1-23-13 creates five separate…
North Dakota retail-theft device defense
Fargo Distribution and Use of Theft-Detection Shielding Devices Defense
North Dakota does not treat every bag, magnet, cutting tool, or retail-security incident as the same crime. N.D.C.C. § 12.1-23-13 creates five separate offenses involving shielding devices, deactivators, removers, and the intentional removal or deactivation of a security device before purchase. The exact subsection controls the elements and whether the charge is a felony or misdemeanor.
The case may turn on design, intended function, knowledge, possession, permission, intent to commit theft, what occurred before purchase, or whether the accused actually manufactured, offered, sold, or distributed a covered item. A store label such as “booster bag” is evidence, not an element.
The Five Offenses in Section 12.1-23-13
1. Distribution of a shielding device
Subsection 1 applies when a person knowingly manufactures, sells, offers for sale, or distributes a laminated or coated bag or device that is peculiar to shielding and intended to shield merchandise from detection by an electronic or magnetic theft-alarm sensor. The State must prove the transaction or manufacture, knowledge, the device’s specialized character, and its intended shielding function. This subsection is a Class C felony.
2. Possession of a shielding device with intent to commit theft
Subsection 2 applies when a person knowingly possesses a laminated or coated bag or device peculiar to and designed for shielding, intended to shield merchandise from electronic or magnetic detection, and does so with intent to commit theft. Possession alone is not enough. The State must prove both the covered design and the accused person’s theft intent. This subsection is a Class A misdemeanor.
3. Possession of a deactivator or remover
Subsection 3 applies to knowing possession of a tool or device designed to allow deactivation or removal of a theft-detection device from merchandise without permission of the merchant or person owning or holding it. Unlike subsection 2, the text does not separately say “with intent to commit theft.” The dispute may therefore center on knowledge, design, possession, and whether the device is one covered by the statutory language. This subsection is a Class A misdemeanor.
4. Intentional deactivation or removal before purchase
Subsection 4 applies when a person intentionally deactivates or removes a theft-detection device from a product before purchase. It focuses on conduct, not possession of specialized equipment. The timing phrase “before purchase” matters. Permission, employee duties, a completed purchase, an accidental detachment, and who performed the act can be decisive. This subsection is a Class A misdemeanor.
5. Distribution of a deactivator or remover
Subsection 5 applies when a person knowingly manufactures, sells, offers for sale, or distributes a tool or device designed to allow unauthorized deactivation or removal of a theft-detection device from merchandise. It is a Class C felony. The State must connect the accused to distribution activity and prove the device’s covered design rather than infer guilt from ordinary online listings or tool ownership.
Felony and Misdemeanor Exposure
Subsections 1 and 5 are Class C felonies. Under N.D.C.C. § 12.1-32-01, the maximum is five years’ imprisonment, a $10,000 fine, or both. Subsections 2, 3, and 4 are Class A misdemeanors, carrying up to 360 days, a $3,000 fine, or both. These are ceilings, not forecasts.
A separate theft or attempted-theft charge may be filed if merchandise was allegedly taken. Conspiracy, accomplice liability, burglary, organized retail theft evidence, and probation consequences may also be alleged depending on the facts. Each count needs its own elements and factual basis; possession of a device should not automatically prove a completed theft.
What Counts as a Covered Device?
Laminated or coated bag “peculiar to” shielding
The statute does not criminalize every lined bag. For subsections 1 and 2, the State must prove a laminated or coated bag or device peculiar to shielding, with the specified design or intent concerning electronic or magnetic sensors. Commercial insulated bags, packaging, medical pouches, electronics protection, ordinary foil, and handmade containers require fact-specific analysis. Construction, layers, seams, conductivity, dimensions, and testing may matter.
Tools designed to deactivate or remove
Magnets, hooks, keys, pliers, wire cutters, screwdrivers, and electronic equipment can have lawful uses. Subsections 3 and 5 focus on a tool or device designed to allow unauthorized deactivation or removal. The prosecution should identify the relevant design features, supported tag systems, and evidence that the accused knew what the item was. A security employee’s conclusion may require technical foundation.
Electronic and magnetic alarm sensors
Retail systems include radio-frequency, acousto-magnetic, RFID, ink-tag, cable, bottle-cap, optical, and other designs. The statute’s wording should be applied to the actual system and object proved. An alarm that sounded or failed to sound does not alone establish how a bag or tool functions.
Store Detention After an Alarm Activates
N.D.C.C. § 12.1-23-14 addresses detention when an antishoplifting or inventory-control device activates as someone exits a store or protected area. Activation constitutes reasonable cause for the owner, operator, agent, or employee to detain the exiting person when sufficient notice advises patrons that the device is used.
The detention must still be conducted reasonably and last only a reasonable time sufficient to inquire into the activation or recover goods. Compliance can protect law enforcement, security personnel, merchants, and employees from specified criminal and civil liability. The statute is not unlimited authority to use unnecessary force, extend detention after the inquiry ends, search unrelated private data, or manufacture consent.
An alarm is not proof of guilt
Tags remain active after legitimate sales. Systems can detect items from another store, employee badges, library materials, medical devices, packaging, or a companion’s merchandise. The defense should identify which pedestal activated, the system type, the item’s tag, checkout records, receipts, time synchronization, and whether staff tested the item after detention.
Statements during detention
Private security ordinarily is not law enforcement, but agency, police involvement, custody, coercion, language barriers, and voluntariness can raise legal issues. A person should not physically resist. Recordings, body cameras, security radio, incident forms, and witness accounts should establish who asked what, whether the person was free to leave, and when police became involved.
Evidence in a Shielding-Device Case
The object itself
The defense should inspect the actual bag, tool, magnet, hook, key, cutter, or electronic device—not rely only on an officer’s label. Photograph construction and condition, preserve packaging and lawful accessories, record measurements, and document how police stored and tested it. If destructive testing is proposed, notice and an opportunity for independent examination may be important.
Scientific and technical testing
A shielding claim can be tested against the relevant alarm technology. The State should describe its protocol, control items, sensor model, frequency, tag type, distance, orientation, battery or calibration status, repetitions, failure rate, and whether the tested configuration matched the alleged use. A demonstration created for court may not reproduce conditions in the store.
Tool-design testimony can also be specialized. An ordinary magnet may release some tags; a tag detacher may have legitimate retail or resale use; a hook key may fit only particular devices. Design, marketing, modification, purchase history, and supported systems are different from a witness’s assertion that an item “can” defeat some security.
Store video and point-of-sale records
Video can show selection, concealment, tag contact, companions, checkout, payment, location of the object, and exit. Camera clocks should be reconciled with point-of-sale data and alarm logs. Missing angles, compression, frame rate, export boundaries, and overwritten footage matter. Complete source files are more reliable than a narrated compilation.
Possession and attribution
A device found in a shared vehicle, borrowed bag, hotel room, family residence, or group cart does not automatically establish knowing possession by every person present. The State should prove dominion, control, knowledge, and identity through location, handling, admissions, fingerprints, DNA where appropriate, purchase history, communications, or other evidence.
Digital evidence
Online listings, searches, messages, videos, maps, and purchase records may bear on manufacture, distribution, knowledge, or intent. The defense should obtain complete conversations and account data. Search terms or possession of a video can have innocent context; an account can be shared or compromised; a marketplace description can be written by someone else.
Authentication and business records
State v. Burton, 2025 ND 83, ¶¶ 20–26, explains that authentication requires evidence sufficient to support a finding that an item is what its proponent claims. State v. Henderson, 2024 ND 42, ¶¶ 9–21, addresses business-record foundation and the limits of a witness lacking knowledge of creation and maintenance. Those rules apply to alarm logs, store databases, camera exports, tag inventories, and online records.
Expert disclosure
State v. Doyle, 2024 ND 108, ¶¶ 5–11, requires proper disclosure of specialized opinions in a criminal case. Retail-security design, radio-frequency shielding, magnetism, digital forensics, and device functionality may exceed ordinary lay knowledge. The defense should obtain the opinion, method, bases, qualifications, tests, and underlying data.
Defenses Under the Five Subsections
The item was not peculiar to or designed for the prohibited function
An insulated grocery bag, electronics pouch, medical container, ordinary magnet, maintenance tool, or common hand tool may have legitimate design and use. The statutory words “peculiar to,” “designed for,” and “intended to” should do real work. The State should not convert capability under unusual conditions into prohibited design.
No knowing possession
A person may not know a bag contains a special lining, that another person placed a tool inside, or that an object has been modified. Shared property, borrowed containers, recent purchases, passengers, coworkers, and family members can create attribution issues. Mere proximity is different from knowing dominion and control.
No intent to commit theft under subsection 2
Subsection 2 expressly adds intent to commit theft. Lawful ownership, research, employment, travel, packaging, resale, electronics protection, costuming, art, or innocent storage may explain possession. The State may use surrounding conduct, but it must prove theft intent beyond a reasonable doubt rather than infer it from the object alone.
Permission from the merchant or owner
Subsections 3 and 5 describe devices designed for removal or deactivation without permission. Retail employees, security installers, manufacturers, recyclers, resellers, repair technicians, and authorized vendors may possess and distribute detachers. Training records, contracts, invoices, employer policy, and the owner of the affected merchandise can establish permission or a reasonable misunderstanding.
No intentional pre-purchase removal
Tags detach accidentally, fall off during fitting, are removed by staff, or remain on items from earlier transactions. The State should prove who acted, what was removed or deactivated, which product was involved, that the act occurred before purchase, and that it was intentional. A video beginning after the tag is already loose may not answer those questions.
No manufacture, sale, offer, or distribution
Felony subsections 1 and 5 require a distribution act. Personal possession is not distribution. An unfinished listing, a message asking about value, delivery without knowledge, or a tool included with lawful equipment may not satisfy the selected verb and culpability. The State should prove the accused controlled the account, knew the item, and took the charged step.
Unlawful search or seizure
Store detention does not automatically authorize police to search a phone, vehicle, hotel room, or home. Consent must be voluntary and within scope; warrants need probable cause and particularity. State v. Quam, 2026 ND 145, ¶¶ 9–18, analyzes nexus for digital warrants. A retail allegation should not become unlimited access to unrelated private data.
Custodial interrogation and voluntariness
State v. Spillum, 2021 ND 25, ¶¶ 11–18, evaluates Miranda custody from the objective circumstances. Location, number of officers, restraint, duration, statements about freedom to leave, and confrontation with evidence matter. Language assistance, intoxication, threats, and promises can bear on voluntariness.
The State charged the wrong subsection
The five offenses overlap but are not interchangeable. A possession case does not become felony distribution because a companion received the bag earlier, and intentional tag removal does not itself prove possession of a specialized deactivator. The information, instructions, and verdict form should identify one or more theories without allowing a nonunanimous blend.
North Dakota Appellate Principles
Published North Dakota appellate construction of section 12.1-23-13 is limited. The cases below address recurring legal questions without inventing device-specific elements.
Plain statutory language and culpability
State v. Olson, 2026 ND 8, ¶¶ 18–29, discusses Title 12.1 culpability and gives effect to every word, phrase, and sentence
. Here, “knowingly,” “intentionally,” “peculiar to,” “designed,” “intended,” “without permission,” and “before purchase” should not be reduced to a general suspicion of shoplifting.
Plea factual basis
State v. Haskins, 2026 ND 23, ¶¶ 22–28, requires comparison of admitted facts with every offense element before a guilty plea is accepted. A plea record should identify the device, selected subsection, conduct, culpability, permission or theft intent when applicable, and felony distribution act.
Multiple charges and double jeopardy
State v. Smith, 2024 ND 127, ¶ 8, restates the same-elements rule: offenses differ when each offense contains an element not contained in the other.
A device count and theft count should be compared using their actual statutory elements, while legislative intent and the unit of prosecution also require analysis.
Documentary value and foundation
State v. Ziegler, 2025 ND 78, ¶¶ 9–18, illustrates that apparently official documents still need evidentiary foundation. Store-loss summaries, vendor descriptions, product listings, and technical manuals must be authenticated and offered for a permissible, nonhearsay purpose or through an exception.
Frequently Asked Questions
Is possessing a foil-lined bag automatically illegal?
No. The State must prove the statutory design and intent requirements. Ordinary insulated or protective bags can have legitimate purposes, and subsection 2 also requires intent to commit theft.
Which charges are felonies?
Knowingly manufacturing, selling, offering, or distributing a covered shielding device under subsection 1 or a covered deactivator or remover under subsection 5 is a Class C felony.
Which charges are misdemeanors?
Possession of a shielding device under subsection 2, possession of a deactivator or remover under subsection 3, and intentional pre-purchase deactivation or removal under subsection 4 are Class A misdemeanors.
What is the Class C felony maximum?
Five years’ imprisonment, a $10,000 fine, or both. Sentencing depends on the conviction and case-specific factors.
What is the Class A misdemeanor maximum?
Three hundred sixty days’ imprisonment, a $3,000 fine, or both.
Does subsection 3 require intent to steal?
The text requires knowing possession of a tool or device designed to permit unauthorized deactivation or removal. It does not repeat subsection 2’s express “intent to commit theft” language.
Can an ordinary magnet be covered?
Capability alone may not answer whether the item is a tool or device designed for the prohibited function or knowingly possessed as such. Its design, strength, marketing, modification, context, and alleged use matter.
Can a store employee possess a tag remover?
Authorized employees and vendors may have legitimate possession and permission. The person’s duties, training, employer records, and purpose should be documented.
Is completed theft required for a device charge?
No. Several subsections criminalize possession or distribution without a completed theft. But a separate theft count requires its own proof, and subsection 2 requires intent to commit theft.
Does an alarm establish reasonable cause to detain?
Section 12.1-23-14 says activation while exiting can establish reasonable cause when sufficient notice is posted. The detention must still be reasonable in manner and duration.
Does an alarm prove the person committed a crime?
No. Purchased items, active tags, system errors, and another person’s property can trigger an alarm. The State must prove the charged crime beyond a reasonable doubt.
Can security search a phone?
Not merely because an alarm sounded. A phone search generally requires valid consent, a warrant, or another applicable legal basis. Scope and voluntariness matter.
What if the tag fell off accidentally?
Subsection 4 requires intentional deactivation or removal before purchase. Video, witnesses, tag condition, item handling, and statements may distinguish accident from intent.
Can an online listing support a distribution charge?
It can be evidence of an offer for sale, but the State must prove account attribution, knowledge, the actual item, its covered design, and the subsection’s other requirements.
Can the device be tested independently?
Defense counsel can seek inspection and appropriate expert testing. The protocol should preserve the item and reproduce the relevant sensor and tag conditions.
What evidence should be preserved immediately?
Preserve receipts, complete video, alarm and point-of-sale logs, the object, packaging, online records, messages, employee authorization, detention recordings, and witness identities.
Reconstructing the Retail Incident
Selection and entry
Retail investigators often begin video review after an alarm or recovery and then work backward. A fair review should include entry, not just the final minutes. It can show whether the accused arrived with the bag or tool, borrowed a cart, exchanged property with a companion, carried a work kit, or purchased an item earlier. It can also reveal whether store employees handled the same bag or merchandise before the alleged act.
Entry footage helps distinguish possession from later proximity. A person who never carried the bag, did not control the vehicle where a device was found, and had no access to a companion’s property presents a different attribution question from someone who brought, opened, and repeatedly used the item. Investigators should preserve every available angle rather than export only clips consistent with the store’s first conclusion.
Merchandise handling and tag contact
The analysis should identify each product, tag type, time selected, person handling it, fitting-room or aisle location, and alleged contact with a tool or container. Some tags are reusable and removed by employees; others are adhesive labels, cables, spider wraps, bottle locks, or source tags inside packaging. Conduct that could detach one design may have no effect on another.
A tag found on the floor does not prove who removed it or when. Prior customers, employees, damage, poor adhesion, or packaging movement can explain loose components. Fingerprints or DNA may be relevant in some cases but are not timestamped evidence and can reflect legitimate contact. Video resolution and obstruction should be described candidly.
Checkout and purchase timing
Subsection 4 turns on deactivation or removal “before purchase.” The transaction time, tender acceptance, receipt generation, mobile checkout, self-checkout workflow, and employee intervention can define the moment of purchase. A customer who removes packaging after payment but before exiting is not situated the same as someone who defeats a tag in an aisle before checkout.
Self-checkout data should include scanned universal product codes, voids, weight alerts, attendant overrides, payment authorization, receipt, and video. A device charge should not become a substitute for proving a separate under-ring or theft allegation. If the merchandise was paid for, the State must still prove the elements of the device subsection it selected.
Group cases and accomplice allegations
Organized-retail-theft investigations may allege roles such as selector, concealer, lookout, driver, returner, or device supplier. North Dakota accomplice liability requires its own culpability and assistance analysis. Association, shared travel, or presence in the store does not automatically establish knowledge of a device or intent to aid its prohibited use.
Complete communications, travel history, payment, vehicle seating, room assignments, and handling of recovered property can support or contradict a coordinated plan. Translation and cultural context may matter. A contact name or group chat should not be treated as a confession without attributing the account and reading the full conversation.
Manufacture and distribution cases
A felony distribution prosecution may rely on online listings, undercover purchases, packages, workshop materials, sales volume, payment accounts, shipping records, or testimony from a buyer. The defense should test whether the item delivered matches the listing, whether it was actually a covered device, who controlled the seller account, what the accused knew, and whether an “offer for sale” was genuine rather than discussion, research, or fraud by another user.
Manufacture requires more than ownership of raw materials. Foil, laminated fabric, adhesives, magnets, tools, and packaging have lawful uses. Assembly evidence, instructions, dimensions, completed items, customer communications, specialized components, and testing may support the State, but the inference must be tied to the statutory device and the accused person.
Lawful retail, security, and recycling work
Merchants, installers, security consultants, manufacturers, liquidators, thrift stores, repair shops, recyclers, and online resellers can lawfully possess tag detachers and tagged merchandise. Employees may take tools between locations or remove tags from damaged, returned, donated, or purchased goods. Authorization records, job assignments, invoices, training, device serial numbers, and chain of ownership can establish legitimate purpose and permission.
Employment termination creates special issues. A former employee may accidentally retain a tool, lack notice that permission ended, or intentionally keep it. The recovery date, return requests, tool checkout, offboarding, communications, and later conduct should be documented. Continued possession may be evidence, but knowledge and the device’s statutory design remain necessary.
Technical Defense Questions
Can the State explain the sensor system?
Electronic article surveillance is not one technology. Radio-frequency labels, acousto-magnetic strips, RFID inventory tags, electromagnetic systems, and optical or cable alarms respond differently. A witness should identify the installed pedestals, software version, operating frequency, maintenance, alarm logs, tag compatibility, and normal false-alarm sources. Broad experience in loss prevention may not supply expertise in every system.
Was the alleged shielding test valid?
A repeatable test should use a known functioning tag and sensor, document baseline detection, place the item in the alleged configuration, repeat trials, and record distances and orientations. Testing only after opening or rearranging the bag can change its characteristics. If investigators add layers, fold material, or place the tag differently, the demonstration may prove a laboratory possibility rather than the recovered object’s function in the incident.
What does “peculiar to” mean in this case?
The phrase distinguishes specialized shielding from an ordinary object that incidentally reduces a signal. Evidence may include unusual multilayer construction, concealed conductive lining, closures designed around merchandise, lack of ordinary insulation function, custom dimensions, instructions, or repeated successful testing. Legitimate manufacture, common consumer design, and an innocent intended use cut the other way.
Was the tool designed for tag removal?
Design can be shown by specialized geometry, fit, magnet strength, vendor description, labeling, included instructions, or modification. But an item’s possible use is not always its design. Pliers can cut a cable, a magnet can open a clasp, and a screwdriver can pry a housing. The court should require evidence connecting design and knowledge to the statutory function, not criminalize the toolbox.
Can expert evidence be independently reviewed?
The defense should seek the device, photographs before testing, laboratory notes, raw data, calibration and maintenance records, model numbers, manuals, software exports, prior tests, and the witness’s methodology. Independent review may confirm the State’s conclusion, identify limitations, or show that a reliable opinion cannot be reached. Either result is more useful than advocacy disguised as science.
What to Do After an Arrest or Store Detention
Do not return to confront store employees, contact witnesses to coordinate accounts, alter a bag or tool, delete listings or messages, or discard receipts and packaging. Preserve the clothing, bag contents, legitimate work records, employment authorization, purchase receipts, travel records, complete messages, and the names of companions and employees. A no-contact or release condition must be followed.
Store video can be overwritten quickly. Counsel can request preservation of entry and exit video, every relevant aisle, fitting room exterior, checkout, parking lot, alarm logs, point-of-sale data, detention room recordings, radio traffic, incident reports, photographs, recovered merchandise, tags, and the alleged device. The request should use a time range broad enough to capture innocent context.
The physical item should remain unchanged. If police or a merchant tested it, the defense needs the original condition and protocol. Packaging and purchase history may show lawful purpose. Employment or vendor records may establish permission. When the item was found in shared space, prompt photographs and witness accounts can document who controlled which property before memories merge.
A defense strategy should decide whether the central issue is statutory coverage, knowledge, possession, permission, theft intent, attribution, testing reliability, unlawful search, or overcharging. Those theories can coexist, but they should not contradict one another without careful pleading. The best early work preserves facts; it does not force a final explanation before the discovery is complete.